Low version car of Audi A3 with an 6.5' screen, but did not come with an touch screen and navigation system. This article will give an instruction about how to add the navigation system to Audi A3, as well as parking guidline, we can also add the mirror link function and backup camera to the system (it is optional) if we want.
Firstly we need the Audi A3 screen change navigation system as below:
(>>>Audi A3 Navigation Sat Nav System With Build In Dynamic Parking Gridline, click here for product link)
- We are very pleased to offer the Genuine Audi firmware updates for Audi MMI 3G Plus systems Only with Sim card slot This update will allow you to use. MMI 3G Plus Firmware update for Google Earth via SIM and Phone via Bluetooth « back. Home Audi A7 4G, S7 4G. DAB+ for Audi A3 8V. RMC rear camera A6/A7. Full LED headlights.
- You can download the update from the A3/S3 itself. This should not be an issue since 4g data is unlimited during 6 month trial. Check the Audi Connect manual. Are you sure that the data is unlimited during that first 6 months?
This makes it easy to find suitable products for your Audi Select Series A3 Sportback (since 2021) A3 Sportback (2017-2020) A3 Sportback (2013-2016) A3 Sportback (2009-2013). Navigation update. Up to version 2019/2020 for Europe (MIB-S). 252.47 EUR. NAVIGATION system MIB for Audi A3 8V. Monkey go take course of English, and stop speak Enlglish like monkey.And sure you’ll get reward by me, specially banana for you.I like that you come like monkey, 5 minutes after my post, i say spijun is good monkey cause idiot like you, dont have other life that on forums. Yctze Car GPS, 10.4in Car Radio Stereo GPS Navigation System Portrait Fit for Lexus IS200 IS250 IS300 IS350 2007 ‑2015 Black 1.0 out of 5 stars 1 $310.89 $ 310.
Un-installed the air conditioner outletCadillac Gps Update
Un-installed screen screws and front panel
Take out the screen mechanism
Take out the glove box
Use 12V motor to rise the LCD 3cm
After rising the screen, we can see 4 screws
Audi A3 Gps Updates
Firstly loose 2 screws on both sides
Then loose the 2 screw in center position; Note: Do not scratch the screen while rotating screen.
After loosing 4 screws, screen can be taken out
Take out the protective board
Take out screen main board
Take out decoration strip
Loose the LCD screws
Pay attention to the screen fixed position
Jack screen up from downward
Open double face adhesive tape with slab rubber
Take out LED pannel
Install our 7' screen
Please note the 2 fixing column on both side
Install the decoration frame
Plug the flat cable and install the driver board
Install the downside decoration frame
Install the protective board
Fix the lcd with the screws, firstly on sides
Secondly screws in center position
Fasten the LCD cables with ribbon
Install LCD back to original position, note: LCD cable should go though backside